Keywords: Quench, oil tank, quenching, quench oil bath, oil bath, quench tank, maintenance, cleaning, slagging, aging, cooling, heat treatment, industrial furnace,

Quenching oil tank cleaning and use specification

1, with the oil pump will be quenching oil tank in the old oil pumping, the pipeline in the old oil should also be drained (can be opened at the joints to exhaust the old oil).

2, the quenching oil tank, furnace wall oil, carbon black and sediment, etc. thoroughly clean, people can go down to the oil tank with cotton gauze to wipe the dirt clean.

3, with new mechanical oil (1 ~ 2 barrels) will be quenching oil tank cleaning again, and then drain the oil.

4, with a small amount of Kerun quenching oil will be quenching oil tank and circulating system and so on clean again, exhaust can be.

5, check whether the circulating cooling system leakage, oil is strictly prohibited water, otherwise it will greatly reduce the service life of quenching oil.

6, again carefully check the quenching oil tank parts whether there is residual oil and other impurities, qualified before adding new oil.

Note: the old oil, water, air, etc. will lead to rapid aging of the new oil, and affect the cooling properties of the oil. Therefore, the quenching oil tank must be cleaned, no residual old oil, water and sediment. 

More Quenching oil tank cleaning and use specification: en.chengchi.net/view-243.html