Tags for: use

Nitriding furnace mold nitriding surface layer appearing reticulate and corrugated, needle or fishbone nitrides and thick white brittle layer will lead to mold toughness reduction, brittleness increas... (more…)

oil pump will be quenching oil tank in the old oil pumping, the pipeline in the old oil should also be drained (can be opened at the joints to exhaust the old oil).... (more…)

Reasons for fan shaft bending or short life:Troubleshooting methods for bent or short-lived fan shafts: circulating cooling water is not enough, the water temperature is too high, or the circulating w... (more…)

As the outer side of the carburizing furnace canister is close to the electric heating element, the temperature is high, so the furnace canister is re... (more…)

Quenching tank agitator control box is a supporting control electrical facility dedicated to control... (more…)

n the practice of heat treatment production, it will produce various defects, such as cracking, severe deformation, unqualified hardness and unqualified performance, etc. Different defects have the same causes, and the correspondi...... (more…)

Be sure to apply anti-corrosion paint before use.Always clean the scum on the edge of the crucible when using it. Ladle out the aluminum liquid in the crucible during long-term shutdown, clean the hanging slag on the crucible wall...... (more…)

Common defects in quenching include oxidation, decarburization, deformation, cracking, overheating, over-burning, insufficient hardness, soft spots, soft spots, etc., among which oxidation, decarburization, overheating, deformatio...... (more…)

Crucible can be divided into the graphite crucible, clay crucible and metal crucible (cast iron pot, stainless steel crucible and so on) three categories. Graphite crucible, is a crystalline form of natural graphite as the main ra...... (more…)