Tags for: ti

The laboratory of a certain research institute is equipped with a professional multifunctional quenching oil tank (quenching tank), and develops various aspects of technical performance and indicators of mechanical parts after hea...... (more…)

There are many small factories, enterprises and even home workshops in the production process, especially the hardware industry, which involves heat treatment processes. They do not understand the heat treatment industry and equip...... (more…)

Quenching cooling equipment is classified according to the cooling process: immersion quenching equipment, jet quenching equipment, quenching machine and quenching press, special quenching cooling device. The installation of quenc...... (more…)

n the practice of heat treatment production, it will produce various defects, such as cracking, severe deformation, unqualified hardness and unqualified performance, etc. Different defects have the same causes, and the correspondi...... (more…)

Isothermal annealing is a special form of complete annealing and the development of complete annealing. Most of it is also used for heat treatment of sub-eutectoid steel and eutectoid steel. Advantage: Isothermal annealing is now...... (more…)

In general, mechanical products always have residual stress on the processed surface. If the product is not properly annealed, it will deform under improper exposure to heat sources (such as sunlight, heat engines, etc.). The resi...... (more…)

he quenching furnace of the continuous mesh belt heat treatment furnace production line is shut down.Confirm that all the processed workpieces have been quenched and cooled, and the furnace shutdown process steps are as follows:... (more…)

Every month, supply oil to the support roller support bearings of the mesh belt quenching furnace with grease, and the fan bearings should be regularly oiled.Fill the bearings of the remaining transmission parts regularly every th...... (more…)

The causes of deformation of precision and complicated molds are often complicated, but as long as we master the deformation rules and analyze the causes, the use of different methods to prevent mold deformation can be reduced and...... (more…)

Be sure to apply anti-corrosion paint before use.Always clean the scum on the edge of the crucible when using it. Ladle out the aluminum liquid in the crucible during long-term shutdown, clean the hanging slag on the crucible wall...... (more…)